John McCleskey in Webster, TX on Houzz

GENERAL FINISHES

Flat Out Flat Topcoat - Flat - PINT

$18.95

Quantity

Flat Out Flat is a truly "Flat" water-based topcoat with a velvety look and feel. Made with a durable self cross-linking acrylic, its performance characteristics are similar to High Performance. In addition it may be used over or under High Performance. DRY TIME for light use: 7 days. Good ventilation, air movement and higher temperatures will accelerate cure time. Cooler temperatures will slow cure time.

CURE TIME: Light use (7-10 days), Regular use (21 days) under ideal conditions (70 degrees and 70% humidity). Good ventilation, air movement and higher temperatures will accelerate dry time. Cooler temperatures will slow cure time. Cure time is the amount of time needed for the finish on a piece to reach maximum hardness and be ready for normal use. This is different than "dry time."  This is different than "dry time." During the curing stage, treat your project with special care. Avoid placing heavy objects on it. Always avoid the use furniture polishes, dusting sprays or oil soaps as they may contaminate the finish for future recoating. Use a water dampened cloth for regular cleaning.

WATER SPILLS AND DAILY USE: Clean water spills up as they occur during regular use and protect from heat. Although General Finishes products are water resistant, they are not impervious to water. Surfaces will not be damaged by spilled water so long as it is cleaned up promptly. We recommend using coasters to protect your wood from standing water and pot holders to protect from heat.

APPLICATION: Wipe on, acrylic brush, foam brush, paint pad applicator, or spray.

COVERAGE: 600 ft 2/gallon or 14.72 m 2/liter.

STORAGE: Keep from freezing.

VOC: 210 g/l.

INGREDIENTS: Water - 7732-18-5, Acrylic Resin - proprietary, Glycol Ethers 

APPLICATOR CLEANUP: Warm, soapy water. For best results, clean all equipment with General Finishes Brush and Gun Cleaner. 

CLEANING YOUR FINISH: Clean with a water-damp rag. Do not clean until the finish has cured completely (21 days).  If your surface requires deep cleaning due to grease or grime, add a speck of detergent or a bit of vinegar. Avoid using oil-soap or silcone-based daily cleaners such as Pledge, Endust or Murphy's Oil. 

Proprietary WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log onto www.epa.gov/lead.

WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects. Do not swallow; first aid: drink water to dilute product. May cause eye and skin irritation; first aid: flush eyes thoroughly with water.

LIMITED WARRANTY: General Finishes products must be tested to your complete satisfaction before using, including compatibility with other manufacturers products. General Finishes will be responsible only for the cost of our products and will not be responsible for any costs such as labor, damage, or replacement costs.

WATER SPILLS AND DAILY USE: Clean water spills up as they occur during regular use and protect from heat. Although General Finishes products are water resistant, they are not impervious to water. Surfaces will not be damaged by spilled water so long as it is cleaned up promptly. We recommend using coasters to protect your wood from standing water and pot holders to protect from heat.

MPN: FPT
SKU: 003387

Search our store